Page 1 of 1
Drive by wire idle
Posted: Sun Aug 26, 2012 1:55 pm
by briwy
Does anyone know how to adjust the idle speed on a drive by wire diesel please?
I want to increase it by about 30-40 rpm to get rid of an annoying vibration that causes things (Fiamma awning mainly) to rattle.
Currently ticking over at 700rpm, just needs upping a trifle.
Re: Drive by wire idle
Posted: Sun Aug 26, 2012 4:34 pm
by rita
Hi briwy,
It might be worthwhile checking the throttle position sensor on the pedal bracket to make sure its tight(secure)
Cheers.
Re: Drive by wire idle
Posted: Sun Aug 26, 2012 5:10 pm
by briwy
Thank rita, checked that it's solid. There doesn't appear to be any way to adjust it on the pedal and I'm a bit wary of fiddling with the pump without knowing what I'm doing as it's running well.
Re: Drive by wire idle
Posted: Mon Aug 27, 2012 11:27 am
by rita
briwy wrote:Thank rita, checked that it's solid. There doesn't appear to be any way to adjust it on the pedal and I'm a bit wary of fiddling with the pump without knowing what I'm doing as it's running well.
Hi briwy,
I agree,the only other simple thing to check is the TOP rubber stoppers on the bracket.
Cheers.