Front Spots / Corner Sensor
Posted: Sun Jun 17, 2012 7:10 pm
Hi
I recently bought my Bongo and it has spotlights fitted to the top of the bull bars, but I can't get them to turn on. I have read that bongos already have the wiring in place for spots, and when I removed the front of the dashboard I found some unattached wiring with a block to attach to a dashboard switch. Any ideas whether this is likely to be the correct wiring? I've tried following the wiring from the spots but got lost quite quickly. If it is likely to be the correct wiring, would another dashboard foglight switch (from ebay) be suitable?
Also on the dash I have a switch that says 'Corner sensor Sound on/off', and in the back bumper at the corners there appear to be sensors. But when I reverse I just get the usual beeps, however many times I press the button, so it isn't working. Any ideas where to start with this? Is it likely to be factory fitted? I'm not sure which fuse it's likely to be so I can't even check this.
As you can probably deduce from my post I'm not particularly handy with this kind of thing, so sorry if it is all a bit obvious. I'm trying to learn!
Many thanks for any help.
I recently bought my Bongo and it has spotlights fitted to the top of the bull bars, but I can't get them to turn on. I have read that bongos already have the wiring in place for spots, and when I removed the front of the dashboard I found some unattached wiring with a block to attach to a dashboard switch. Any ideas whether this is likely to be the correct wiring? I've tried following the wiring from the spots but got lost quite quickly. If it is likely to be the correct wiring, would another dashboard foglight switch (from ebay) be suitable?
Also on the dash I have a switch that says 'Corner sensor Sound on/off', and in the back bumper at the corners there appear to be sensors. But when I reverse I just get the usual beeps, however many times I press the button, so it isn't working. Any ideas where to start with this? Is it likely to be factory fitted? I'm not sure which fuse it's likely to be so I can't even check this.
As you can probably deduce from my post I'm not particularly handy with this kind of thing, so sorry if it is all a bit obvious. I'm trying to learn!
Many thanks for any help.