Bongo Fury

Could someone please tell me what actually runs from Fuse 1.
It's just labelled "Cabin".
Fitted a Willinton kit a few weeks ago which is all working fine but since fitting it the alarm seems to be having various fits.
I didn't fit the alarm so I'm not sure what/where it's wired into.
Fuses 1 and 8 have been removed and replaced by the Willinton wires as per instructions so I'm wondering if this has had a bearing on the alarm playing up.

Read this thread.. It may have some bearing on your alarm problem..? http://www.igmaynard.co.uk/bongo/forum/ ... =3&t=55063

Thanks jaylee, saw that thread and that's what made me think about our alarm.
I'll have to get the instrument pod do some digging and see what it's wired into.
I suspect it's into the LB as recently we'd been away and not used the van for about a month.
The alarm turned off OK on the button but the central locking didn't unlock. The van started perfectly first time though and after running a bit the central locking worked again.

I reckon the factory CL wired into the LB system then? Possibly along with the alarm.... I believe some ECU gubbins is on fuse 1 too.? (Though not down in the fuse box plan.) I've pulled a few fuses, & fuse 1 when pulled certainly causes some error code flashing on the dash till its put back in on mine...