Flashing Hold Light Diagnostics
Posted: Tue Mar 27, 2012 1:51 pm
I have run through the diagnostics procedure as per the Transmission Codes Fact sheet. The sequence of flashes is 7 flashes in about 7 seconds. This sequence is repeated. During the procedure a light is illuminated just below the hold light warning saying "sediment".This warning light goes off once the engine is started. Am I right in assuming that "sediment" therefore is the problem which the flashing hold light is reporting. Bongo is 1997 SGL 3 2wd . The vehicle ID plate lists "transmission" as 4EC-AT .
Any help appreciated.
Any help appreciated.