Bongo Fury

I need to replace the rear diesel pump seal the one behind the blanking plate who has changed it and how did you get up their to do it what tools did one use?

im thinking flexi head spanner 10mm but will i get one up there? help and advice please i have managed to do just about everything i can on my bongo, this is my last job.

Thanks

some people find its easy and to others its just a real bit**. much depends on how far the pump is tipped/timed when fitted.
take off the injector pipes,
mark the pump at the front mounting/adjustment screws, then loosen them and the lower bracket and tip the pump to you, then at least you can see what your fumbling with. or just wait untill its timing belt time then remove the pump and do the front seal at the same time.

Jimbob738 wrote: I have managed to do just about everything i can on my bongo, this is my last job.

Thus speaks a "Glass half full" person!



Frank

Diplomat wrote:

Jimbob738 wrote: I have managed to do just about everything i can on my bongo, this is my last job.

Thus speaks a "Glass half full" person!



Frank

Dont Jynx me man i have done well up to now i have to wax oil and get the Body shop to sort my arches then im ready for Summer time BABY YEAH!

be positive !

Done it dont know what all the fuss was about no more leaking wooo here comes the Summer fun!

Flexi head spanner and some small hands required it took me 20 mins and i scraped my wrist on the top of the pump but all worth the pain.