Page 1 of 1
Wiper linkage ball cap
Posted: Thu Oct 06, 2011 9:20 pm
by mbockh
Hi
I need a replacement white nylon ball cap on the wiper linkage. Any ideas of where I can obtain one.
many thanks Mike
Re: Wiper linkage ball cap
Posted: Thu Oct 06, 2011 9:35 pm
by teenmal
mbockh wrote:Hi
I need a replacement white nylon ball cap on the wiper linkage. Any ideas of where I can obtain one.
many thanks Mike
Hi mike,I dont think Mazda supply this part seperate,you would need to purchase the link arm itself.
You may be able to obtain the joint from a good motor factor, or a visit to a car breakers,should be quite a common part.
Cheers..
Re: Wiper linkage ball cap
Posted: Fri Oct 07, 2011 1:08 pm
by 321Away
Re: Wiper linkage ball cap
Posted: Sun Oct 09, 2011 5:31 pm
by teenmal
Hi,if you are stuck this might be an option.
http://www.askthemechanic.co.uk/wipers/
Cheers
Re: Wiper linkage ball cap
Posted: Sun Oct 09, 2011 8:05 pm
by M 80NGO
When i was roadsiding for tha AA we used to stretch the finger of a latex glove over the ball and push it back into the socket as a temp repair
Also using Rain X on your screen will prolong the life of your wiper system cos you won't need to use it half as much
