Bongo Fury

My airbag warning is staying on. Has anybody else had this, and how can I sort it out?

You would have to get it plugged in to a diagnostic machine to get the light put out, but if it has a fault the light would come back on. A diagnostic machine would also tell you what fault code is causing the problem.

I'm fairly sure that Bongos dont a diagnostic port as in OBD/OBD2 as they are too old. Try a search on here for diagnostics.

stuc wrote:You would have to get it plugged in to a diagnostic machine to get the light put out, but if it has a fault the light would come back on. A diagnostic machine would also tell you what fault code is causing the problem.

No you dont, like the abs and diagnostic system, it runs a scan every time you turn the igntion on, so if you repair the fault turning off the ignition for a while (10 mins or so) will reset the scan, tho the fault code will still be logged in the ecu memory which requires a battery off reset. not exactly rocket science with a bongo, at most you have 2 airbags, but its most commonly the 'clockspring' behind the steering wheel thats failed. You dont need obd equipment to read bongo codes, it has its own onboard system

Julian

Thats good info to have, thanks for that.

Had a similar problem, the airbag light flashed, changed the clock spring, problem solved.