Page 1 of 4
New Reversing Bulb
Posted: Wed Feb 23, 2011 10:52 pm
by SPARKYSSS
Not a major pimp but just put one of these in
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT
You can now see my Bongo reversing from space!!!!
Re: New Reversing Bulb
Posted: Wed Feb 23, 2011 11:00 pm
by You've Been Bongod
bloody hell i bet that is bright
Re: New Reversing Bulb
Posted: Wed Feb 23, 2011 11:06 pm
by SPARKYSSS
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 6:16 am
by helen&tony
Hi
Thanks for the pointer...Just what's needed
Cheers
Helen
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 8:54 am
by T9sus4
Me, too!
Oh no, listing has ended!
Does anyone know which type of bulb we need for the reversing light? There are a few similar listings, but with different numbers:
http://shop.ebay.co.uk/i.html?_nkw=SMD+ ... m270.l1313
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 9:07 am
by Triple/R
I've copied & pasted it~hope it works~
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT scroll down a bit then you'll (hopefully) see it.
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 10:02 am
by SPARKYSSS
Yeah the listing has ended as I bought it
There are plenty there just scroll down and add to basket.
Glad to be of service
Marc
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 2:51 pm
by bigdaddycain
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 5:08 pm
by SPARKYSSS
I have run some LEDs along the underside also for the reversing but they are not quite in the centre - so weekend will be taking them off and putting on again.
Also running a strip of red LEDs alongside the white strip for a brake light
I will then be running some blue LEDs around the inside of the sliding door - any idea how to wire this up please - want it to come on when door opens (same as courtesy light)
Re: New Reversing Bulb
Posted: Thu Feb 24, 2011 5:12 pm
by SPARKYSSS
So whats the cunning plan then Ste?????
Are all the bulbs in the rear cluster the same size??
Re: New Reversing Bulb
Posted: Fri Feb 25, 2011 8:41 pm
by jaylee
SPARKYSSS wrote:I have run some LEDs along the underside also for the reversing but they are not quite in the centre - so weekend will be taking them off and putting on again.
Also running a strip of red LEDs alongside the white strip for a brake light
I will then be running some blue LEDs around the inside of the sliding door - any idea how to wire this up please - want it to come on when door opens (same as courtesy light)
Lower the strip light & tap from that loom.
Tap into the earth switch for the strip light from the negative side of the LED's & take the constant live from the same point..
Run the wires fer the LED down behind the head lining & trim.
I may invest in those bulbs myself!
Re: New Reversing Bulb
Posted: Fri Feb 25, 2011 9:14 pm
by T9sus4
Sorry, I am being particularly thick here: I can't figure out which of the many LED bulbs would fit for my reversing light.
Any explanation or direct link very much appreciated!
Re: New Reversing Bulb
Posted: Fri Feb 25, 2011 11:31 pm
by SPARKYSSS
The bulb in the listing is a direct replacement
Re: New Reversing Bulb
Posted: Fri Feb 25, 2011 11:41 pm
by T9sus4
I think I need a stiff drink. The bulb that's no longer lavailable is a direct replacement.
Re: New Reversing Bulb
Posted: Sat Feb 26, 2011 9:27 am
by helen&tony
Hi
T9sus4
I ordered from here, after reading the thread:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 158wt_1139
That'll confuse the hell out of Customs here...something from outside their normal sphere of activity...how much will they attempt to charge in duty, I wonder!!!...probably about 30.00 quid...in which case
they know what to do!
Cheers
Helen
PS...I'll let you know if they are O.K.
