Page 1 of 2
Plasma dials
Posted: Sat Jan 01, 2011 4:20 pm
by daveblueozzie
As some of you have seen elsewhere on the pimp section i have fitted some plasma dials.
One dial checks the leisure battery another checks the main starter battery and the third one is just a fancy clock.
Today I fitted a couple of led latching switches that light up blue (well what other colour would i use?
)
no need to have the dials on when I'm not there or parked at night.
link to the switches below.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT
A pic of the dials with the switches below them.
the switches lit up when on.
Re: Plasma dials
Posted: Sat Jan 01, 2011 4:29 pm
by maviczap
Nice, I may get onje of these in red for the fog light switch
Re: Plasma dials
Posted: Sat Jan 01, 2011 5:34 pm
by Barrington
Re: Plasma dials
Posted: Sat Jan 01, 2011 11:47 pm
by jaylee
They are damn good dials for the price....
Looked at these switches a while back... Nice to see em fitted Bongo wise...!
Re: Plasma dials
Posted: Sun Jan 02, 2011 12:52 am
by cabte
I like the dial where did you get them from dave?
Re: Plasma dials
Posted: Sun Jan 02, 2011 1:06 am
by daveblueozzie
The clock from this company.(not cheap)
http://cgi.ebay.com/52mm-Car-Auto-Gauge ... 4aa615f188
the other voltage dials from this company(there are different styles and dials)
http://stores.ebay.co.uk/McGill-Motorsp ... 34.c0.m322
Re: Plasma dials
Posted: Sun Jan 02, 2011 1:21 am
by bigdaddycain
Re: Plasma dials
Posted: Sun Jan 02, 2011 4:29 pm
by jaylee
Just a reminder.. They can be dimmed when tied in with the rheostat from the speedo plasma dials...
Re: Plasma dials
Posted: Mon Jan 03, 2011 10:22 am
by sniperFM
where did you get the switches from mate, would use that for the fog lights also!
Re: Plasma dials
Posted: Mon Jan 03, 2011 10:24 am
by hembramacho
sniperFM wrote:where did you get the switches from mate, would use that for the fog lights also!
See the link in the first post at top of page.
Cheers
Andrew
Re: Plasma dials
Posted: Mon Jan 03, 2011 10:30 am
by sniperFM
Doh!
Cheers dude!
Re: Plasma dials
Posted: Thu Mar 03, 2011 2:18 am
by bigdaddycain
A very quick clip of the gauges powering up, then down... Mine are identical to DBO's except i have a turbo boost gauge instead of a main battery gauge...
http://www.youtube.com/watch?v=CnIwvsba ... re=related
Re: Plasma dials
Posted: Fri Mar 04, 2011 12:03 am
by blobber
Nobody can film night time as good as you Ste.
Re: Plasma dials
Posted: Fri Mar 04, 2011 10:05 pm
by maviczap
Right I need some advice before I go and splurge some cash on some dials.
I've got a mount to hold 3 dials above or below the radio. 3 x 52mm holes
One is going to have a clock, but as my oil pressure light isn't working, I wanted to fit an oil pressure gauge as a precaution. But do I go for a mechanical one or an electronic one?
Then the other one was going to be a water temp gauge, or would an oil temp gauge be better?
Recommendations please?
Re: Plasma dials
Posted: Fri Mar 04, 2011 11:45 pm
by bigdaddycain
blobber wrote:Nobody can film night time as good as you Ste.
DOH! I'd posted the wrong clip!
