Bongo Fury

Hi,
I want to remove the large Cubby (behind the gear selector).Has anybody removed there's,if so how is it done,ie is it clipped in or glued etc etc..

thanks..

I'm assuming you mean the cubbybox/armrest, if so it is screwed down to the surround by 4 screws.

You'll see them in the bottom of the box or remove the surround, tip on it's side and you will see them poking through.

Hi Tonic,

No, I mean the large Cubby below the heater controls on the dash.

Thanks..

Ours was part of the moulding its not separate, or at least I couldn't find a way to remove it! It had been damaged with some big holes when we first bought it, and I thought I would remove it and repair it, only to have to repair in situ. I used some model makers plastic sheet to blank off the holes and then resprayed the whole thing.

rita wrote:Hi Tonic,

No, I mean the large Cubby below the heater controls on the dash.

Thanks..

oh well in that case............ sorry haven't got a clue


>>>>>>>>>>>goes back to removing rear window curtains & rails >>>>>>>>>>>>>>>>

Couldn't shift mine either It looks like it ought to be separate, but I couldn't find a way of doing it

This may help...? http://www.igmaynard.co.uk/bongo/forum/ ... 51&start=0

what you mean the crap magnet behind the gearstick

http://i59.photobucket.com/albums/g320/ ... car006.jpg


something like this

cheffy34 wrote:what you mean the crap magnet behind the gearstick

http://i59.photobucket.com/albums/g320/ ... car006.jpg


something like this

Hi,Cheffy
No I want to remove the cubby box completely.
And fit it back in at a latter date.

thanks..

rita wrote:

cheffy34 wrote:what you mean the crap magnet behind the gearstick

http://i59.photobucket.com/albums/g320/ ... car006.jpg


something like this

Hi,Cheffy
No I want to remove the cubby box completely.
And fit it back in at a latter date.

thanks..

Nope it is moulded i thinks infact i'm sure it is

Ok thanks guys,

It looks like A Band on Ship..

thanks..

That part of the dash is moulded in one peice,the usual grey colour is spray applied to the black moulding and masked up create the effect that it is a separate item.You can cut it out thats all!

Dabs

cheffy34 wrote:what you mean the crap magnet behind the gearstick

http://i59.photobucket.com/albums/g320/ ... car006.jpg


something like this