Page 1 of 1

removing switch blanks

Posted: Mon Jun 22, 2009 6:50 pm
by peanutcrusher
can someone help with this one i'm trying to remove the blanks and coin holder from the dash so as to be to put my spot light switch in. i've been told the wiring will already be there just need to put the switch in. which side of the steering is it more than likely to be?

Re: removing switch blanks

Posted: Mon Jun 22, 2009 6:51 pm
by waycar8
most Ihave seen the foggy is on the right of the steering wheel

not all bongo has the wiring loom, easy way to tell is look under you bumper and see if the wires are there for the actual fog lights.

Re: removing switch blanks

Posted: Mon Jun 22, 2009 7:17 pm
by haydn callow
Just lever them out with a small flat screwdriver,,,,you will soon see if there is a loom at the back....on the right is the place to aim for.

Re: removing switch blanks

Posted: Mon Jun 22, 2009 7:53 pm
by Gert The Green
You started blinging that van up wiv all those maga cheap parts av ya :lol:
Good to have met ya mate,a mini Plymouth 'bash' lol.

Any bits you couldn't get ?

Re: removing switch blanks

Posted: Mon Jun 22, 2009 10:44 pm
by peanutcrusher
working on the pimping, the lower part of the front loom was not there when i looked i take that means that the top part will be missing as well :( i'll have to sort out the top half of the loom.

Re: removing switch blanks

Posted: Tue Jun 23, 2009 6:20 pm
by waycar8
peanutcrusher wrote:working on the pimping, the lower part of the front loom was not there when i looked i take that means that the top part will be missing as well
Yep :cry: , you will have to re wire it all in.

Re: removing switch blanks

Posted: Tue Jun 23, 2009 6:39 pm
by Bulwell Bongoleers
Hi

I have a spare lower part of the loom the bit that connects to the fog lights

Andy