Page 1 of 1
help with no1 exhaust stud
Posted: Sat Jun 06, 2009 12:14 pm
by scarlet
can any one help me are the exhaust studs parallel or have they got a shoulder on them as i am trieing to get my no1 stud out as the stud had sheared level with the manifold used stud easyouts then it sheared of level with the head,
Re: help with no1 exhaust stud
Posted: Sat Jun 06, 2009 12:19 pm
by David Edwards
Sory cant help, my local garage did mine for £30.00 but I am sure someone will have the info soon, good luck anyway.
Re: help with no1 exhaust stud
Posted: Sat Jun 06, 2009 12:57 pm
by haydn callow
You will have to drill it out with a carbide drill..use a 6mm first and a bit of tube in the manifold to centre it. Hard work now the easyout is snapped in there.