Page 1 of 1
stud patten
Posted: Tue May 26, 2009 9:52 pm
by peanutcrusher
can anyone tell me the stud setup for the wheels on my bongo e.g spacing etc i know they are a five stud that much i worked out on my own
i'm looking at a set of wheels, they are from a VW passat will they fit.
Re: stud patten
Posted: Tue May 26, 2009 10:15 pm
by scanner
No
You need
PCD - 5x114.3
Offset - 35 to 45
Centre bore - 67.1
http://www.alloyguide.com/
Re: stud patten
Posted: Tue May 26, 2009 10:21 pm
by peanutcrusher
thanks
Re: stud patten
Posted: Mon Jun 01, 2009 9:54 pm
by peanutcrusher
do any alloys from any other cars fit the bongo?
Re: stud patten
Posted: Mon Jun 01, 2009 11:12 pm
by scanner
Yes look in the guide - follow the link posted earlier.*
Just look for cars with the same PCD and centre hole diameter.
*Hint - it's why I posted it.
Re: stud patten
Posted: Wed Jun 03, 2009 9:58 pm
by peanutcrusher
what does this mean on wheels
7.5J X 17H2. FL757
Re: stud patten
Posted: Wed Jun 03, 2009 10:35 pm
by scanner
First - those I'm pretty sure about.................
7.5 = Width of rim in inches
J = Profile of rim well
17 = diameter of rim in inches
Then those I'm not at all sure of.................
H2 = no idea
FL757 = Load index of rim in Kg's???
Unless anybody else knows for certain.