Bongo Fury

I need to take my rear bench seat, help!

Any clues?

Thanks
Dave

hmmn.............if you told us where you were taking it it may help , if your driving your bongo your rear bench seat will come along for the ride

Loads of info on here, but first read this http://www.igmaynard.co.uk/bongo/forum/ ... =3&t=29471
If you only want to remove the seat, it's just 4 bolts.

FAQ should help - http://www.igmaynard.co.uk/bongo/forum/ ... =43&t=9562 , loads of info there
Welcome to the forum by the way

francophile1947 wrote:Loads of info on here, but first read this http://www.igmaynard.co.uk/bongo/forum/ ... =3&t=29471
If you only want to remove the seat, it's just 4 bolts.

If you look at his name John - it may give you a clue to location

missfixit70 wrote:

francophile1947 wrote:Loads of info on here, but first read this http://www.igmaynard.co.uk/bongo/forum/ ... =3&t=29471
If you only want to remove the seat, it's just 4 bolts.

If you look at his name John - it may give you a clue to location

I know Kirsty but, like you, he might want to be more specific

Don't try and take it out on your own it's very heavy - it takes two to lift it - and welcome to the forum and to ownership.

Yes, I took my benches out at the weekend. They are deceptively heavy!

there just about the right weight to shove one under each arm and pump them biceps you bunch of weaklings, ive lifted heavier sacks of spuds. ive picked up a car off the ground that weighted 3/4 tonne. although that was a long time ago. come to think of it thats how much the bleeding seats weigh.

Welcome Dave, undo bolts, lift seat out.