Bongo Fury

Is there one on the 2.5TD engine? If so, where?
I'm toying with the idea of fitting matching oil pressure and water temperature gauges to my Freda, but can't find a take off point for the oil pressure sender unit (probably just me going blind )

Hi
It's down by the alternator on the passenger side....from memory a grey wire....just find the sensor, almost behind the alternator, switch on the ignition and pull the wire off!! ....you'll find it no probs. Make sure you can get a suitable T-piece so you still have the oil light.
Cheers
Helen

Thanks Helen - I'll put my glasses on next time

Hi
O.K. John....but don't use my glasses......you need good eyesight to see through them!!!
Cheers
Helen