Bongo Fury

While topping up transfer box oil I noticed a grease nipple on front end of rear prop shaft just behind joint where it comes out of transfer box, have checked on forum but no mention of any prop shaft grease nipples. Anyone know how often to grease, type of grease and maybe if there are more greasing points.
Thanks in advance.

splitpin wrote:While topping up transfer box oil I noticed a grease nipple on front end of rear prop shaft just behind joint where it comes out of transfer box, have checked on forum but no mention of any prop shaft grease nipples. Anyone know how often to grease, type of grease and maybe if there are more greasing points.
Thanks in advance.

Coo!!! I haven't seen a grease gun for years, let alone a grease nipple - sounds like I'm gonna have to get another one (from an antique shop, I assume )

Plenty of em around, Machine Mart have three, (guns, not nipples).

splitpin wrote:Plenty of em around, Machine Mart have three, (guns, not nipples).

Back to your original post - if I remember correctly, I used to use a lithium based, high melting point grease.

francophile1947 wrote:

splitpin wrote:Plenty of em around, Machine Mart have three, (guns, not nipples).

Back to your original post - if I remember correctly, I used to use a lithium based, high melting point grease.

Was that gold pressed lithium

Thanks for advice rooster and franco, shall squirt some grease in when I find my old gun.