Bongo Fury

Just lifted the drivers seat and noticed a hose has baddly worn and started to leak. It's the hose that comes from the top of the engine and runs down to a steel pipe, that connects to another rubber hose that goes to the rad. Can anyone help me to source the correct hose to replace this one.
One more thing before I go, can the cam belt be done from the inside the cab or do you have to get under the van? The fact sheet does not mention getting underneath, I have a 95 2.5d.
Thanks,
Mike.

Send a PM to flippa re hoses - he does replacement silicon ones.
Sorry, no idea re cambelt, but I'm sure it won't be long before somebody else posts

hi mike i have plenty of them available in black, blue or red....just click on my link

cheers john

cambelt can be done from inside but its hard to get to turn the crank without getting under.limited access from inside, expect a few scraped knuckles unless you have slim hands not shovels like me.

Check all your other hoses thoroughly & consider if it's worth replacing them all while your at it, if ones going - they're all the same age after all.

nice one mike i will get it sent out in the morning