Bongo Fury

Hi

i'm going to put remote central locking in at the weekend. i've got the unit all wired up and tested using an old computer power supply so i know it all works and the actuator moves. i've looked at the factsheet for finding the live and earth connections and how to mount the actuator. i have to wires that should go to the indicators to flash them to confirm locking/unlocking.

any ideas what colour wires i should be attaching them to and where is the best place to do the connection ?

thanks Dave

In a plug behind the kick panel in the drivers footwell, can't remember exact colours but they are green with a tracer (white, black or red tracer is ringing a bell but could be wrong) To test don't just switch the hazards on, test the indicators left then right individually as one wire is a common which will not work for what you want but will show a voltage with whichever indicator is flashing

Green/Black and Green/White on mine.

I concure green black trace/ green white trace, top tip stringman

cheffy34 wrote:I concure green black trace/ green white trace, top tip stringman

Does that tell me that you have finished or started?

finished, biiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiig job GP (for me that is) no better next time get it done in half the time, as you said preperation, only wish i didn't have to keep stopping for kids, work, wife etc etc

A big TAAAAAAAAAA

Pleased that I could help. Hope that you are as impressed as I am in the alarm at the price.

Thanks for the replies. i'll know what i'm looking for now when i get the panel off.

Once again the Bongo Collective comes to the rescue

Sure am and the service, had a couple of things of them now postage is a rip tho ignition colours diff colour on v6 but, and i gonna have to reposision the touch key pad should av'e read the destructions better



Don't ask

you live n learn