Bongo Fury

Posted: **Wed Feb 27, 2008 1:35 pm**

My SGL3 Speedo does not work, neither distance or speed.
On examination after removing the instrument from the dash there would appear to be burnt/brown areas on the GREEN printed circuit board.
Is it possible to have this repaired?
Is it possible to source a replacement circiut board?
Speedo SPF94-A
Any advice would be much appreciated.

Posted: **Wed Feb 27, 2008 1:37 pm**

You would be better off getting a mazda 626 speedo console, no need for chip, reads in m.p.h. much more reliable

Posted: **Wed Feb 27, 2008 3:01 pm**

http://s257.photobucket.com/albums/hh223/BonGoRANT/

Displays the damage or is this normal?

Posted: **Wed Feb 27, 2008 3:39 pm**

looks burnt out to me
as Pete says try and get a 626 from a scrappy but beware the prices can vary some have been very lucky and got 1 for a fiver mine cost £20 and some have sold on ebay for up to £70 or £80

the circuit board looks a bit different to the one I have but is stll a spf94a

Posted: **Wed Feb 27, 2008 11:45 pm**

£20 is not bad to get a reliable speedo

Posted: **Thu Feb 28, 2008 9:43 am**

I paid £40 for a 686 speedo from ebay and I think the guy has another one on there.

Posted: **Thu Feb 28, 2008 8:08 pm**

PM maxheadroom for a 626 speedo.

He has a secret source. . . . .