Bongo Fury

I have a switch with LED and a blanking plate. Both have electric wires connected to them, but I do not have a clue what they are for. Any ideas? I have a jpeg but don't know how to post it...

Location: Right hand side, find mirror adjuster, travel south to small storage space, move left to a recess - one switch and blanking plate.

[/img]

Details of how to upload a picture here http://www.igmaynard.co.uk/bongo/forum/ ... php?t=9285 - hopefully that will make it easier for someone to help.

Hi quinnw

Welcome to the madhouse.

Please put your location on your profile.

It will enable you local bongo owners to offer practical help.

Awaiting your piccy with interest.

H

Location added, thanks for all your help, hope this works:



Any ideas?

I have a small round button to the left of where your buttons are located that also has an LED and I think its the fogs. Have you tried them? Have you got extra fogs - underneath or on the bullbars if you have them like mine?

Take off some of these extra keys on your keyring quinnw or you'll have a worn out ignition barrel in the near future

It looks like where the rear fog light is usually wired up to meet UK regulations on import.

I've got 2 of those side by side in the same place.... after market Front and rear fogs. They were cunningly wired up wrong by a previous owner/dealer too so they didn't light up and they didn't switch the lights on either.... genius!

As usual 10 / 10 - thanks - rear fog light. Spot on.

Do I get a gold star for that?

Go on then kirsty... you can have one of these.....