Page 1 of 1
wipers
Posted: Fri Feb 01, 2008 11:26 am
by meek.tv
im on my second set of new wiper blades and the passenger side front wiper seems to be fouling the edge of the window frame (was the same with both sets).
is this a common thing or am i doing something wrong?
Posted: Fri Feb 01, 2008 11:48 am
by Veg_Ian
What edge of the screen are you talking about? Bottom edge then the arm needs taking off the spigot and reseating slightly anti-clockwise so that the arc of the sweep doesn't quite reach the bottom of the screen. If the edge of the screen then your blade is too long. Replace with one slightly shorter.
Posted: Fri Feb 01, 2008 12:13 pm
by meek.tv
too long, maybe wiper no.3 will fit
Posted: Fri Feb 01, 2008 2:08 pm
by mikeonb4c
I seem to recall when I got a set from Bongobits that all three blades were different lengths. I think (but my memory is very vague on this) it might have been 18" and 17" for the front and 16" for the back. Call Bongobits & check/order?
Posted: Fri Feb 01, 2008 2:17 pm
by Ian
The ones we supply are 40cm rear, 60 cm & 40 cm front.
Posted: Fri Feb 01, 2008 4:47 pm
by maxheadroom
Posted: Sat Feb 02, 2008 12:48 am
by cheffy34
Phewwwww they had me thinkin for a minute then
Posted: Sat Feb 02, 2008 7:39 am
by BongoMTBer
Sure I just fitted 17" on the rear of mine.
Posted: Sat Feb 02, 2008 10:01 am
by daveblueozzie
Fitted these to my bongo, probably a little expensive ,but i think well worth it.
http://cgi.ebay.co.uk/Mazda-Bongo-Retro ... dZViewItem