Page 1 of 1

Flashing hold button

Posted: Thu Jan 31, 2008 9:07 pm
by ludaharnah
Hi all

Have a problem with a flashing HOLD button, also seems to struggle to get onto 4th from 3rd gear even when warm ( not cold start ). Any advice welcome :? :? :?

Posted: Thu Jan 31, 2008 9:12 pm
by francophile1947
If you're a member, there's a fact sheet here http://www.igmaynard.co.uk/bongo/member ... dlight.pdf

Posted: Thu Jan 31, 2008 9:22 pm
by Nevets
Hi, if the light comes on when you switch on the ignition/glow plug light before you start the engine and drive away its a electrical fault not a mechanical fault, ie throttle potentiometer,speed sensor,solenoid,etc.
not much but every little bit helps.... :P

Posted: Thu Jan 31, 2008 9:44 pm
by bigdaddycain
The sequence of flashes is relevent luda... It's a sort of code that could help in determining the problem.