Page 1 of 1
Ignition switch wiring
Posted: Tue Jan 08, 2008 11:21 pm
by The Great Pretender
Fitting an alarm and need to know what colour wires go from the switch to the starter and stop valve if anyone can help.
Posted: Tue Jan 08, 2008 11:24 pm
by roosteruk
I am fitting an alarm saturday and need to find that too.
I aim to find the ignition connector and then maybe chase the wiring from there
Posted: Tue Jan 08, 2008 11:29 pm
by The Great Pretender
roosteruk wrote:I am fitting an alarm saturday and need to find that too.
I aim to find the ignition connector and then maybe chase the wiring from there
Did you go for the Hawk alarm?
Posted: Tue Jan 08, 2008 11:33 pm
by roosteruk
I did, but it aint mine I am fitting.
Its Bongoinmad 1st, then Platty, then I may find time to slot Roosters in...????lol
Posted: Wed Jan 09, 2008 12:13 am
by stringman
You need to check this with a test light or multi meter:
Starter crank at ignition switch: 2.0mm black/ yellow wire
Engine stop: At fuse box behind fuse 9 1.5 mm Black/white or black/ yellow wire.
indicatoer if you need those: in block connector O/S kick panel green/black and green/white wires
Good luck
Posted: Wed Jan 09, 2008 12:24 am
by cheffy34
Watching this one with great interest, ordered mine today, havent decided if im brave enough to tackle it or pay someone
Posted: Wed Jan 09, 2008 12:43 am
by The Great Pretender
Thanks Stringman will use my meter. The reason for asking is that I have a problem with arthritus so the least time I spend in awkward positions the better.
