Page 1 of 1
roof bar info please
Posted: Thu Oct 04, 2007 8:58 pm
by neepboy
ok guys, looking to make my own roof bar set up due to lack of cash for some of the lovely set ups Ive seen on this site, so here's what I know:
hole centre to hole centre =109.2cm
What thread is the captive nut in the free top??
What is the accurate distance between holes front to back?
cheers
Luke
Posted: Thu Oct 04, 2007 10:48 pm
by Quicksilver
M8`s should do the trick. Measure the depth of the threads in the roof with an ikea pecil, couple of washers and coperslip and a set of 401 roof bars from halfords, don`t need a foot pack just bolt it on!
Posted: Fri Oct 05, 2007 4:28 pm
by Dude
Please show us a pic of your roof bar assemble with the 401 roof bars, I can't picture how to fit them.
Posted: Fri Oct 05, 2007 10:15 pm
by Quicksilver
will see if i can foto it 2mrw.
I had to ever so slightly enlarge the hole in the middle of the base plate of the rack to accept an 8mm bolt, other than that it couldnt be easier.
Posted: Sun Oct 07, 2007 2:40 pm
by neepboy
champion work as ever chaps!
Posted: Sun Oct 07, 2007 8:00 pm
by Quicksilver
Posted: Mon Oct 08, 2007 12:11 pm
by Dude
Thanks, Nice pic's by the way.
Posted: Mon Oct 08, 2007 8:47 pm
by neepboy
great stuff, off to check tomorrows free ads paper for a set of bars.
Thanks for taking the time....soon get my surfboard up there...just in time for winter in the north east of scotland...a well