Page 1 of 1
New Water Pump required.
Posted: Sat Aug 11, 2007 11:47 am
by Dabs
I have to have a new water pump fitted does anyone know the correct torque setting for the bolts.
I have the factsheet but this little bit of info is missing.
Is it important??
Cheers Dabs
Posted: Sat Aug 11, 2007 8:56 pm
by timhum
Sort of tight and a bit more with a normal length socket wrench did it for me. Not sure about the Foot Pounds but it is more important that the bolts are evenly done up as you would know.
Best of luck and check the bolts after a week to be sure.
Not very helpful I know but you might be getting desperate!
Cheers,
Tim
Posted: Sat Aug 11, 2007 9:38 pm
by Dabs
Cheers Tim
I wont be doing this myself but I am getting as much info together as I can for the garage.
Dabs
Posted: Wed Aug 15, 2007 6:36 pm
by Dabs
Job done!! New water pump in situ plus coolant refill (second time this year) fully bled and pressure checked full coolant system.
Boy am I happy I have it back.Been out for an hours run around all seems ok
Well chuffed!!!
Dabs
Posted: Wed Aug 15, 2007 7:02 pm
by Peg leg Pete
Posted: Wed Aug 15, 2007 8:25 pm
by mikeonb4c
Great news Dabs. Is it rude to ask what the £ was, in case I have to face the same on day
Posted: Wed Aug 15, 2007 9:00 pm
by Dabs
Have PMd You Mike!
Dabs
Posted: Wed Aug 15, 2007 11:55 pm
by bigdaddycain
Glad to hear that arnie is fighting fit again dabs
Posted: Thu Aug 16, 2007 12:40 am
by Dabs
Posted: Thu Aug 16, 2007 12:40 am
by Dabs
Posted: Thu Aug 16, 2007 12:41 am
by Dabs
Posted: Thu Aug 16, 2007 12:57 am
by bigdaddycain
Chuck another in for good measure dabs!
Go on... ya know you want to....
