Bongo Fury

Posted: **Sat Apr 21, 2007 12:17 am**

my temperature gauge isnt working where is the sender unit? how do I get at the gauge? can anybody help please thanks

Posted: **Sat Apr 21, 2007 12:28 am**

The sender unit is under the middle seat on the drivers side. Slide the seat forward and pull the carpet back. Swing the cover out of the way ( after undoing some screws and there it is. Put a new earth on and it is sure to work. (I hope)

Posted: **Sat Apr 21, 2007 11:14 am**

I think Haydn has given you directions on how to access the fuel gauge not the water temperature gauge.

The water temperature sender unit is midway along in the side of the cylinder head on the offside (under the drivers seat) see

http://www.lushprojects.com/bongoparts/ ... ays.html#8

Lower right picture, part number 18-840C

Hope this helps.

Posted: **Sat Apr 21, 2007 8:40 pm**

Sorry, quite right. senior moment

Posted: **Sun Apr 22, 2007 8:05 am**

Vanmanerik wrote:I think Haydn has given you directions on how to access the fuel gauge not the water temperature gauge.

The water temperature sender unit is midway along in the side of the cylinder head on the offside (under the drivers seat) see

http://www.lushprojects.com/bongoparts/ ... ays.html#8

Lower right picture, part number 18-840C

Hope this helps.[/quote thanks for the help and information havnt taken any action yet but the gauge worked yesterday petebee

Posted: **Thu Apr 26, 2007 8:40 pm**

when i first got my bongo the gauge wasn't working,the guy had had a new sender fitted and still didn't work,the garage said it was the gauge itself,turned out to be an airlock,as i found out by accident whilst experimenting with the bleeding system,it hadn't worked for a week or so since the guy had a service done and coolant flush,obviously by a garage not clued up on these vehicles,(btw the garage was in stoke).

Bongo Fury

temperature gauge faulty

temperature gauge faulty

Temp gauge

Re: Temp gauge