Bongo Fury

dom_e wrote:I did a bit of a search and found a few of people's novel interiors. i hope it's okay to post these links.


http://www.igmaynard.co.uk/bongo/forum/ ... ge+box+bed

This one is mine so I won't repost. Maroon photos are mine

clummzie wrote:

wormey wrote:Mine

Nice conversion Wormey, 321Away I assume?
We've got exactly the same (saves me uploading any pics) including the top loading fridge which means you can have your cup of tea in bed in the morning!

The only thing I'd change would be a split lid on the cooker/sink and have it lowered to be flush with the work surface along with a lino (not carpet) floor.

it is a 321 conversion, fridge runs for 3-4 days off the leisure battery. We have purchased the smallest theftford pottapotti that even when set up can be beneath the flattened rear seat.

Here're a few pics of our temporary set up. A Weaco CF-25 fridge sits to to the r side of the storage/bed unit.

http://www.flickr.com/photos/dom_eggbee ... 105173781/

It's basic, but works quite well. A fold up dog crate sits on top of the box when travelling. Hold all bags can also be strapped to it, so it helps to increase the storage capacity of the Bongo.

I love the Lulworth.....looks very posh and the layout is cool.I am very envious!!!! Here are a few pics of ours at the moment which has been great when we went away at halloween with the boys......the awning does give us extra day space. The next time i put pictures on should be with the additions and rock n roll bed in place. We are really looking forward to it and the coming months to get traveling around our lovely country!!!





Sorry about the quality

DIY conversion,,

cabte wrote:DIY conversion,,

oooh, where did you find that bracket, I have been looking for something similar for ages?

Hi i got it from ebay , called under cupboard tv bracket

I had to do a couple of mods to it so it didnt fall down when on travel as its realy for a kitchen cupboard,

I recall somebody making a small unit that mounted on the r window pillar in the back. I think it bolted to the seatbelt hole and was used to store cutlery, plates etc. I thought that was a neat idea.

Can anybody remember and post a link to the thread?

Edit - just found it and added it to the list on page 2.

Mine













Cheers
Steve

That's nifty, thepickles. Where was that done?

thepickles. thats a different one
is it in aft or tini?
and what does lit look like when the beds down and how does it work..
i like,,

dom_e wrote:That's nifty, thepickles. Where was that done?

dom_e it was in the Bongo when I bought it, I bought the Bongo off Triple/R on the forum he may have more info

cheers
Steve

cabte wrote:thepickles. thats a different one
is it in aft or tini?
and what does lit look like when the beds down and how does it work..
i like,,

Cabte

It's a AFT,

bed works fine , I will try and put some piccies up over the weekend

cheers
Steve

PS sent you a pm

Having seen all these super plush innards, thought I would show our simpler, perhaps more knock about inside. Done like this because we wanted entry from back and sides.







Taken for insurance purposes

Technophobe - that's the idea of this thread; it'll highlight all of the internal solutions from the simple and cheap to plush and expensive with everything in between. As my pics show, we're currently using a cheap homemade solution, which kind of works for us at the moment, but could inspire ideas for others.