New owner - Starting issues....

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Tobybongo
Junior Bongonaut
Posts: 17
Joined: Sun Feb 11, 2018 7:56 pm

Re: New owner - Starting issues....

Post by Tobybongo » Tue Mar 27, 2018 5:47 pm

Right, so I ended up taking to me local garage who have sussed it to be a connector in the inhibitor switch. Wiring was corroded and a pin had snapped off. Just trying to source a replacement now! I need to get the gearbox code but don't have access to the vehicle at the moment annoyingly!

Will get there in the end :D

The pictures he sent..


Image

Image
Top
teenmal
Supreme Being
Posts: 3656
Joined: Thu Mar 27, 2008 6:08 pm
Location: north lanarkshire

Re: New owner - Starting issues....

Post by teenmal » Tue Mar 27, 2018 7:07 pm

That particular IS carries BV8419444 part number, this is used on all models up to aprox 1999 then an updated BW0119444 was used.

Take care
Top
Tobybongo
Junior Bongonaut
Posts: 17
Joined: Sun Feb 11, 2018 7:56 pm

Re: New owner - Starting issues....

Post by Tobybongo » Tue Mar 27, 2018 7:14 pm

teenmal wrote: Tue Mar 27, 2018 7:07 pm That particular IS carries BV8419444 part number, this is used on all models up to aprox 1999 then an updated BW0119444 was used.

Take care
Wow thank you! My mechanic said there was no part number on and that he wouldn't be able to get through general parts companies. Would you agree? I'm struggling to find a second hand one!
Top
Post Reply

Return to “Techie Stuff”