Page 2 of 2

Re: BMW clock connection

Posted: Fri Feb 03, 2012 11:00 pm
by winchman
jaylee wrote:Hey Winchman, it wouldn't happen to have an exterior temp gauge on the readout too would it??

I got hold of something similar from a 626, but gutted it for a temp gauge for the coolant...

Image
Dont think so, its the same as this one
http://www.ebay.co.uk/itm/Bmw-E36-compa ... 43acec0520

Tried to connect it up and it lights, some nice surface mounted LEDs inside it so might butcher them for these as I have two and no use for them.
I fitted an analog one but mine has the cubby on the left whilst all the others have it on the right, I was mooching at a scrap yard and bought a few in case one didnt work, but they are all fine, so rest are going on Ebay

Re: BMW clock connection

Posted: Fri Feb 03, 2012 11:19 pm
by jaylee
I'm with you now....!! It sits in where an analogue clock would go..

I wanted the cubby on the left with some space to fit the gauge, so aesthetically it would sit right over the other gauges in the big cubby/glory hole cover i made with two other gauges in out of a spare middle seat back table/cover...