Bongo Fury

dandywarhol wrote:Towsure - did it myself - good bit of kit.

Hi dandy

Is there any drilling/holes already there, etc. Easy fit

I have fitted them to Fords, Sierra/Mondeo, but didn't want to mess up the Bongo.

Cheers

can anyone tell me where to get the type that you can't see the bar from? I have asked this before but had no replies. (Like ford tinny's) thanks
Dave

lizard wrote:

dandywarhol wrote:Towsure - did it myself - good bit of kit.

Hi dandy

Is there any drilling/holes already there, etc. Easy fit

I have fitted them to Fords, Sierra/Mondeo, but didn't want to mess up the Bongo.

Cheers

I think i drilled one through the boot floor - been a couple of years since I did it - ol' memory's getting wasted

I went for Towsure in the end and fitted it meself. Took 2hrs
The missus was scheduled to help but had a headache all of a sudden when I asked her to hold it

i have a towsure towbar that you cannot see behind the bumper, and yes you have to drill a hole through the floor at the rear of the bongo,but it is under the plastic strip ,so cannot be seen after the strip is replaced.

Hi,

I had a towsure fitted yesterday whilst some other stuff was being done. I think they had one hole to drill up through the floor for an extra securing rod. Rest fitted into existing holes.

I will take a picture later if that helps but from memory you can only see the flange and towball that's it, rest is hidden behind bumper. Looks a very substantial towbar and seemed well made and painted. I will probably waxoil it as well to be sure.

Let me know if you want a picture.

Andy

Excellent peeps. It's a Towsure one for me then.

Me Too!

Our A1 Towbar kit came painted black already... so surely it doesn't need to be Hammerited before installation?