Page 2 of 4

Posted: Thu Jan 24, 2008 11:38 pm
by cheffy34
Yeh come on flip im still waiting for you to sort out the missing v6 ones :lol: :lol: :lol: :lol:

Posted: Thu Jan 24, 2008 11:53 pm
by flippa
hmm :D them little metal pipes do worry me but i guess they gotta be in metal? as for the bigger bore metal i.e between engine and rad that would be an awful long run for a single pipe each side .....im ordering some rolls of smaller id hose and see what it can replace without been any special shape......cheffy gimme a chance mate i havnt even driven the v6 yet well only to and fro the mot :D ...as for taking it apart hmm i wonder does anyone know of a substance jelly like that would set inside a hose in order to take a mould ....but then i suppose id have to cut the hose to get it out :roll:

Posted: Fri Jan 25, 2008 12:12 am
by John the sparky
I know of one jelly like substance............








JELLY :shock: :lol: :lol: :lol: :lol:

I'll get my coat!

John

Posted: Fri Jan 25, 2008 12:26 am
by cheffy34
John the sparky wrote:I know of one jelly like substance............








JELLY :shock: :lol: :lol: :lol: :lol:

I'll get my coat!

John
Maybe you should consult your quack about that issue john :lol: :lol: :lol:

Posted: Fri Jan 25, 2008 1:20 am
by flippa
:lol: :lol: :lol: ..any particular flavour john :lol: :lol: :lol:

Posted: Fri Jan 25, 2008 8:26 am
by papa joe
Hello flippa

Not sure if it's my 'puter, but had e-mail returned from the e-mail address
you supplied ( basically saying not known) :?

Have tried again AND sent a pm.

If you dont get either, please could you pm me with a contact number.

Get there sooner or later ! :roll: :wink:

Cheers pj.

Posted: Fri Jan 25, 2008 12:02 pm
by flippa
no problem pj i got your mail :wink: ...it was probably the dodgy link i supplied :D

Posted: Fri Jan 25, 2008 12:11 pm
by Ian
If there are any further supply problems regarding the jubilee clips, John Matthews has been in touch to inform me that a full range can be obtained from Namrick Ltd of Hove. 01273-779864. http://www.namrick.co.uk

Posted: Sat Jan 26, 2008 7:34 pm
by bigdaddycain
Thanks Ian, that reminds me,i purchased the last 2 sets of clips from manflex today. I phoned the order in with my number witheld to test em, i spoke to mick,and he knew exactly what a mazda bongo clip set was straight away.... ( he passed the test :lol: )

The new stock will be replenished by the middle of next week, i think they are suprised by the amount of calls they are taking regarding them! :lol: ( i did warn em!) :roll:

http://www.manflex.co.uk/contact.php

Posted: Sat Jan 26, 2008 11:11 pm
by flippa
Thats a nice little link ian for bits and bobs very handy :D .... :shock: sold out bdc :shock: .... \:D/ you mean ta say ? theres been a run on jubilee clips :shock: :D :D :D

Posted: Sat Jan 26, 2008 11:18 pm
by bigdaddycain
Yip... 18-20 in a kit. (as you already know flippa) They are under the impression that owners of an imported campervan type thingy suddenly seem to be buying them in large quantities... :shock:

Posted: Sat Jan 26, 2008 11:19 pm
by John the sparky
LIME!

Posted: Sat Jan 26, 2008 11:26 pm
by flippa
:lol: :lol: wobble wobble john :lol: :lol: :lol:

Posted: Sun Jan 27, 2008 8:20 am
by John the sparky
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Posted: Sun Feb 03, 2008 12:26 am
by cheffy34
Hey guys n gals has anyone fitted silacone hoses to ther v6 yet, i want to but im pretty sure a couple are different or am i wrong :?:

Will the ones for the diesal fit where appropriate :?: :?:

if they do what chances of yellow ones pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase :!: :!: :!: :!: :!: