Hi, I have a diesel Bongo and need to replace the coolant pipes to the rear heater matrix, is there any reason these could not be made of copper? as I have the capability to bend and flange copper pipe
Thanks
Coolant pipes to rear heater matrix
Moderators: Doone, westonwarrior
-
- Bongonaut
- Posts: 30
- Joined: Tue Jun 18, 2019 1:43 pm
Re: Coolant pipes to rear heater matrix
No reason whatsoever , you could also consider lagging them.
You could also make them from rubber/plastic as long as the materials used are suitably rated.
You could also make them from rubber/plastic as long as the materials used are suitably rated.
-
- Bongonaut
- Posts: 30
- Joined: Tue Jun 18, 2019 1:43 pm
Re: Coolant pipes to rear heater matrix
Thanks, on another note, how do you remove the plastic clips that hold these pipes?
Thanks
Thanks
Re: Coolant pipes to rear heater matrix
did you figure this out I see the nut and bolt just could not undo the clip or see how to undo it
- g8dhe
- Supreme Being
- Posts: 10223
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: Coolant pipes to rear heater matrix
I've just posted a picture of the clip and its release catch on your original post.