Hi,
I'd be grateful for any guidance.
I've bought a project Bongo and I'm working through some things.
The gearbox hold light was flashing and not shifting into top. I did the diagnostic test and came up with code 62 (3-4 shift solenoid valve).
I have a replacement pack of solenoids and I've just taken the gearbox sump off.
Can someone let me know what else I need to take off to get to the solenoids to replace them?
I've got a photo of the underside of the auto box with the sump off but can't seem to attach it (too large).
many thanks
Tom
fixing gearbox
Moderators: Doone, westonwarrior
Re: fixing gearbox
Does the workshop manual help ?
http://www.g8dhe.net/bongo_images/gearbox/rc4ael.pdf
http://www.g8dhe.net/bongo_images/gearbox/rc4ael.pdf
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
Re: fixing gearbox
I think this manual is for a later model (dated 2003)
has anyone done this job on an earlier Bongo?
Mine is a 1996 V6
thanks
has anyone done this job on an earlier Bongo?
Mine is a 1996 V6
thanks
Re: fixing gearbox
spotdoc67 wrote: Sat Jun 06, 2020 9:53 pm I think this manual is for a later model (dated 2003)
has anyone done this job on an earlier Bongo?
Mine is a 1996 V6
thanks
Its up to March 2003 ,it should cover your needs.
Re: fixing gearbox
Mine was doing this intermittently, it turned out to be dirt on the crank sensor.