Good afternoon Bongonauts,
Just wanted a bit of advice, a bit concerned about the positioning of the top rail into the door frame. This is a double skinned part of the door frame and seems very close to spot welds! Also are pop rivets a better fixing solution rather than screws. Thanks in anticipation (apologies if this has been answered elsewhere) .
N.B spring is coming! Paul
Van-x tailgate curtain installation
Moderator: Doone
- BernieBongo1955
- Bongonaut
- Posts: 41
- Joined: Sun Jul 15, 2018 7:01 pm
- Location: Gloucestershire
Van-x tailgate curtain installation
Paul - Gloucestershire -2001 2.5 V6 Pop Top
"Be yourself. Everyone else is already taken"
"Be yourself. Everyone else is already taken"
Re: Van-x tailgate curtain installation
Best bet might be to look at a Bongo with factory fitted rail.
If you're passing down the M5, J19/20 I'll happily meet up, or someone near you may offer a quick viewing.
If you're passing down the M5, J19/20 I'll happily meet up, or someone near you may offer a quick viewing.
-
- Bongolier
- Posts: 480
- Joined: Mon Nov 13, 2017 5:39 pm
Re: Van-x tailgate curtain installation
My van-x rail was fitted when I bought the Bongie, it’s on the plastic trim on the van roof not the actual door.
2002 Friendee 2.0 ltr Petrol.
- BernieBongo1955
- Bongonaut
- Posts: 41
- Joined: Sun Jul 15, 2018 7:01 pm
- Location: Gloucestershire
Re: Van-x tailgate curtain installation
Hi folks,
Many thanks for your prompt response. If Bob could send a photo of top rail position I would be most grateful, please don't worry if not possible. I have rear conversion so fitting to plastic trim not an option. Thanks again. Paul
N. B
I think my main concern is working out which bit is double skinned and the proximity to the glass; and therefore how to safely accommodate the top rail.
Many thanks for your prompt response. If Bob could send a photo of top rail position I would be most grateful, please don't worry if not possible. I have rear conversion so fitting to plastic trim not an option. Thanks again. Paul
N. B
I think my main concern is working out which bit is double skinned and the proximity to the glass; and therefore how to safely accommodate the top rail.
Paul - Gloucestershire -2001 2.5 V6 Pop Top
"Be yourself. Everyone else is already taken"
"Be yourself. Everyone else is already taken"
Re: Van-x tailgate curtain installation
Happy to do that, of course.
I've never managed to put a pic on here (I know, I'm told it's easy ) but if you PM me your e mail I'll do it in daylight tomorrow.
I've never managed to put a pic on here (I know, I'm told it's easy ) but if you PM me your e mail I'll do it in daylight tomorrow.
- BernieBongo1955
- Bongonaut
- Posts: 41
- Joined: Sun Jul 15, 2018 7:01 pm
- Location: Gloucestershire
Re: Van-x tailgate curtain installation
Hi Bob
Many thanks for your prompt response, I hope I have sent a DM, I'm a bit new to this forum malarkey
Cheers Paul
Many thanks for your prompt response, I hope I have sent a DM, I'm a bit new to this forum malarkey
Cheers Paul
Paul - Gloucestershire -2001 2.5 V6 Pop Top
"Be yourself. Everyone else is already taken"
"Be yourself. Everyone else is already taken"
Re: Van-x tailgate curtain installation
You're very welcome.
Just let me know if you need more pics/different view.
Hope they help a bit.
Just let me know if you need more pics/different view.
Hope they help a bit.