Central Locking

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
fergusminto
Junior Bongonaut
Posts: 14
Joined: Mon Oct 03, 2011 1:47 pm
Location: Scottish Borders

Central Locking

Post by fergusminto » Tue Mar 20, 2018 6:20 pm

Central key locking has packed up on all doors. Very slight clicking noise coming from drivers door. Anyone have any ideas
User avatar
g8dhe
Supreme Being
Posts: 10248
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.
Contact:

Re: Central Locking

Post by g8dhe » Tue Mar 20, 2018 8:01 pm

If the drivers door lock itself is working direct with the key, but not operating the other doors, then the most common cause is the drivers door loom, followed by the locking module itself. Try operating the key whilst slowly opening/closing the drivers door, if it suddenly works then the loom is at fault, down by the lower door hinge. They can be repaired, but be aware that once one wire starts breaking then others will follow soon after, either replace all the wires with new lengths or replace the whole loom (available in shop).
Otherwise it needs a meter and testing to identify where the fault is.
Geoff
2001 Aero V6, AFT, full side conversion.
Image Spherical Visions
samuel
Bongolier
Posts: 485
Joined: Fri Jan 21, 2005 11:37 pm
Location: Polgooth, Cornwall

Re: Central Locking

Post by samuel » Sat Mar 24, 2018 5:17 pm

The clicking suggests the electrics are working fine.

Its normally the servo inside the drivers door which packs up. Its just a solenoid and after time they simply loose their effectiveness. About 3 or 4 pounds on ebay.
"Living the Dream"
Post Reply

Return to “Techie Stuff”