HI
My drivers side main headlight does not work when dipped, however when on full beam does work. Any ideas? have checked bulbs and assume because it works on full beam it cannot be an issue with the fuse!
Thank you
headlight issue
Moderators: Doone, westonwarrior
Re: headlight issue
Likely fused separately, good place to start.
And welcome to the Forum.
And welcome to the Forum.

Re: headlight issue
Same fuse, but the connectors to the lamps themselves are well known for corrosion and then overheating, so check the actual lamp connector and inspect the contacts. If they are faulty then ceramic H4 sockets are available on ebay very cheaply.
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
Re: headlight issue
I think Geoff identified the fuse here: http://igmaynard.co.uk/bongo/forum/view ... 3&p=559485
Allans Garage retired. Try PGS (Plymouth Garage Services) or Mayflower Auto Services Plymouth
- Northern Bongolow
- Supreme Being
- Posts: 7722
- Joined: Mon Mar 15, 2010 11:33 pm
- Location: AKA Vanessa
Re: headlight issue
it sounds like one of the bulb elements has gone, the dip beam, if you put it on main beam is it the main beam element that is working only.
try swapping the bulb over from passy side to test.
try swapping the bulb over from passy side to test.
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
- the1andonly
- Tribal Elder
- Posts: 772
- Joined: Sat Nov 10, 2012 8:17 pm
- Location: Northampton
Re: headlight issue
http://www.g8dhe.net/bwm/
A tremendous body of work
the first port of call for electrical issues in older models
A tremendous body of work
the first port of call for electrical issues in older models
Re: headlight issue
Thanks guys, I am going to check the bulb first, as the replacement I put in I had had for a while, then will check fuses etc then will look at contacts.