AFT Roof Seal

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Mark Elvin
Tribal Elder
Posts: 601
Joined: Wed May 14, 2014 6:25 am

AFT Roof Seal

Post by Mark Elvin » Tue Jun 10, 2014 6:57 am

Been looking for some new AFT roof seal, found this stuff, looks like it may fit, just need to check measurements later.

http://www.ebay.co.uk/itm/LARGE-Car-BOO ... 4ab9203b9d
Top
clutha
Bongolier
Posts: 306
Joined: Fri Aug 10, 2012 8:02 pm
Location: Helensburgh
Contact:
Contact clutha

Re: AFT Roof Seal

Post by clutha » Tue Jun 10, 2014 8:08 am

Bookmarked, thank you =D>
Freda now gone, :-/ But nice wee Burstner obtained ;-)
http://www.gordonbickerton.co.uk
Top
rita
Supreme Being
Posts: 3286
Joined: Tue Sep 15, 2009 7:11 pm

Re: AFT Roof Seal

Post by rita » Tue Jun 10, 2014 8:31 am

Ditto

=D> =D> =D> =D>
Top
Mark Elvin
Tribal Elder
Posts: 601
Joined: Wed May 14, 2014 6:25 am

Re: AFT Roof Seal

Post by Mark Elvin » Tue Jun 10, 2014 10:26 pm

http://pages.ebay.com/link/?nav=item.vi ... 58&alt=web

The gap between the AFT and the roof is about 10mm so I'm wondering if this will fit.
Top
Mark Elvin
Tribal Elder
Posts: 601
Joined: Wed May 14, 2014 6:25 am

Re: AFT Roof Seal

Post by Mark Elvin » Wed Jun 11, 2014 8:27 am

I'd really like to know what the new Mazda seal measures in at, mine is pretty compressed so difficult to make a judgement on size. The gap now I've had a chance to measure more accurately would appear to be about 12-13mm when m,measured at the back edge (at the joint in the seal).
Top
Post Reply

Return to “Techie Stuff”