Replacing a door mirror

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Farm Boy
Apprentice Bongonaut
Posts: 8
Joined: Tue Aug 26, 2008 10:18 pm
Location: Isle of Wight

Replacing a door mirror

Post by Farm Boy » Tue Dec 27, 2011 8:50 pm

Hi, couple of questions please.

Does anyone have or know where we might get a manual fold drivers side door mirror? Ours has been knocked off by a passing truck!

Also, wondering if its possible to convert to an electric fold by changing the mirror and the control switch i.e are the extra wires already in the loom? Because these mirrors seem easier to get hold of than manual fold ones.

Also is it possible to remove the mirror without removing the door card?

Thanks for your help

Ian
the janner vanner
Supreme Being
Posts: 1193
Joined: Sun Feb 05, 2006 9:25 am
Location: the forgotten corner of Cornwall

Re: Replacing a door mirror

Post by the janner vanner » Tue Dec 27, 2011 9:53 pm

hi, i've just changed the drivers side mirror on my bongo because the old one would fold when raching 50 and not fold electrically. I'm afraid you have to takeoff the door card if fitting an elictric folding one, but I should think you wouldn't if non electric. The mirror housing is held on by 2 screws. Dead easy to get off. I've ditched the old one now.

If you are still looking at an elitric one I would check behind door card to see if the wiring is there. It's a white plug in the hole behind where the mirror situted.

Do you have a switch for the closing mirrors? a pointless effort if you haven't.

I know theres been problems with Bongobits, but I do know tha thy have several mirrors in stock as they hve just scrapped 3 bongos.

all the best
Image
The Janner Vanner
User avatar
Northern Bongolow
Supreme Being
Posts: 7722
Joined: Mon Mar 15, 2010 11:33 pm
Location: AKA Vanessa

Re: Replacing a door mirror

Post by Northern Bongolow » Tue Dec 27, 2011 10:19 pm

if its got non lecky mirrors its maybe a quite early bongo, look after it, it may be quite valuable soon. 8) .
check your vin no.
User avatar
daveblueozzie
Supreme Being
Posts: 5922
Joined: Tue Feb 20, 2007 9:25 pm
Location: North West.

Re: Replacing a door mirror

Post by daveblueozzie » Wed Dec 28, 2011 12:13 am

My bongo does not have leccy mirrors, i checked to see if there was a loom to change them, but nothing there ,no plugs or extra wire. :twisted:
Lost without my Bongo.
User avatar
westonwarrior
Supreme Being
Posts: 2918
Joined: Thu Apr 05, 2007 6:27 pm

Re: Replacing a door mirror

Post by westonwarrior » Wed Dec 28, 2011 9:08 am

electric mirrors can be manualy used so may be worth considering using even if there is no loom
Post Reply

Return to “Techie Stuff”