DIY Replacement Flooring Progress

Questions & answers about kitchen units, stoves, fridges, heaters, water tanks, seats, mattresses etc etc.

Moderator: Doone

User avatar
sotal
Tribal Elder
Posts: 932
Joined: Mon Jun 01, 2015 8:52 pm

Re: DIY Replacement Flooring Progress

Post by sotal » Fri Dec 29, 2017 9:06 pm

I had a few lengths of wood in the garage which I chopped up into little pieces. I don't know the size but they were probably about 2cm by 1cm. That is a guess though! I chopped up little blocks and placed them in. Once they were all in place I put a squirt of adhesive on them (think it was pink grip) and carefully placed the ply on top. Then put weights on and left it to dry. I think with the kitchen on top etc. That it would have been ok like that but I decided to use some pre-existing holes near the step to put a couple of countersunk bolts in so that it can't move anywhere.
When I eventually got the step sorted properly I ended up drilling that and putting a couple of coach bolts through. I tried adhesive before but the constant movement as people got in and out made it come off. Two coach bolts completely sorted that though.
Janner
Bongonaut
Posts: 29
Joined: Fri Mar 03, 2017 5:44 pm

Re: DIY Replacement Flooring Progress

Post by Janner » Sat Dec 30, 2017 2:53 pm

Ok great. Thank you!
BongoPembs
Apprentice Bongonaut
Posts: 7
Joined: Mon Sep 03, 2018 1:32 pm

Re: DIY Replacement Flooring Progress

Post by BongoPembs » Fri Oct 04, 2019 9:06 am

HI,

I'm about to attempt this on the weekend.

Carpets and all ripped out already and good to go.

Plan on making a cardboard template and going from there.

Just a quick query – how did you managed to fit the ply around the seat runners? Did you leave them in the whole time?

I was planning on leaving them in, but I’m thinking this might cause a bit of trouble when fitting the ply.

Any advice would be appreciated, along with any further words of warning or tips.

Thanks in advance.
User avatar
Doone
Supreme Being
Posts: 2544
Joined: Sun Jul 04, 2004 10:58 am
Location: Westcountry
Contact:

Re: DIY Replacement Flooring Progress

Post by Doone » Fri Oct 04, 2019 10:59 am

If 'sotal' doesn't see your question, the info on this list might help you. :) https://www.igmaynard.co.uk/bongo/forum ... %2BRunners
Trading Standards Approved garage: http://www.allansvehicleservices.co.uk
Post Reply