Waeco MS 50 Cruise Control - Fitting

All about modifications, shiny alloys, chrome wheel nuts & mirrors, body skirts and much more!

Moderator: Ian

Bongold
Bongonaut
Posts: 32
Joined: Sat Jun 03, 2017 3:39 pm
Location: Cardiff

Re: Waeco MS 50 Cruise Control - Fitting

Post by Bongold » Sun Jan 28, 2018 5:13 pm

Can someone provide the fitting instructions for the MS50 please? I have a V6

Thanks in advance! :D
Bob
Supreme Being
Posts: 15255
Joined: Wed Oct 17, 2007 12:54 pm
Location: North Somerset

Re: Waeco MS 50 Cruise Control - Fitting

Post by Bob » Sun Jan 28, 2018 5:57 pm

Try this:

https://manuall.co.uk/waeco-magicspeed- ... e-control/

And from memory Simon Jones did a Fact Sheet some while back.
scanner
Supreme Being
Posts: 7244
Joined: Wed Sep 19, 2007 10:20 pm
Location: Cambs

Re: Waeco MS 50 Cruise Control - Fitting

Post by scanner » Wed Feb 14, 2018 9:39 pm

Found this possible source for MS50s if anyone is still looking.

https://www.carandcamp.com/autozubehoer ... ms-50-ms50
Bob
Supreme Being
Posts: 15255
Joined: Wed Oct 17, 2007 12:54 pm
Location: North Somerset

Re: Waeco MS 50 Cruise Control - Fitting

Post by Bob » Wed Feb 14, 2018 10:18 pm

Jolly good find Scanner. =D>

I can highly recommend this unit for the Bongo. 8)
fatcatlawyer
Tribal Elder
Posts: 547
Joined: Tue Feb 05, 2008 8:44 pm
Location: Chesterfield

Re: Waeco MS 50 Cruise Control - Fitting

Post by fatcatlawyer » Wed Sep 04, 2019 2:45 pm

Hi, I have fitted and wired up all except the two brown wires that get connected to the brake light circuit. Any hints as to
: where to find the best place to do the connecting and confirmation that the two brown wires with the lit can be interchangeable
Yours Ian G
Bob
Supreme Being
Posts: 15255
Joined: Wed Oct 17, 2007 12:54 pm
Location: North Somerset

Re: Waeco MS 50 Cruise Control - Fitting

Post by Bob » Wed Sep 04, 2019 3:23 pm

I connected to the switch fitted above the brake pedal.

I would have thought if the wires weren't interchangeable they would be different colours. [-o<

Edit: I seem to remember it being spade connectors so easy to use piggy backs.
PLM
Apprentice Bongonaut
Posts: 4
Joined: Fri Sep 25, 2020 11:22 am

Re: Waeco MS 50 Cruise Control - Fitting

Post by PLM » Wed Sep 30, 2020 5:27 am

Mark Elvin wrote: Fri May 29, 2015 9:41 am Can the MS 50 use a stalk type arrangement for operation?
Did you ever get to the bottom of this Mark? I much prefer a stalk arrangement for using my cruise as well
Post Reply

Return to “Pimp My Bongo”