I managed to connect the diagnostic port to check for any errors. It gives a series of long and short flashes, but I don’t know how to read these - I have seen information that shows error codes are two digits and others say 4 digits.
Also, how do I know when it has finished giving error codes - does this keep going on as a loop?
I haven’t been able to find a mechanic near me who can read the diagnostic port. Any advice works be great.
I have a video of the flashing lights off that would help anybody.
Diagnostic
Moderators: Doone, westonwarrior
-
Quiksilver
- Junior Bongonaut
- Posts: 12
- Joined: Mon Sep 02, 2019 10:42 am
-
g8dhe
- Supreme Being
- Posts: 10217
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: Diagnostic
It continues in a loop, the basic 2-digit code info is here http://www.philmcfadden.co.uk/MazdaDiagnosticBox.htm
and if your a club member then a fact sheet covers the 4-digit codes here https://igmaynard.co.uk/download/diagnostics.pdf
and if your a club member then a fact sheet covers the 4-digit codes here https://igmaynard.co.uk/download/diagnostics.pdf
Spherical Visions