Front Hub Nut Size

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
AndyHeard
Junior Bongonaut
Posts: 23
Joined: Sun Aug 27, 2017 6:32 pm
Location: South Wales

Front Hub Nut Size

Post by AndyHeard » Tue May 11, 2021 10:54 am

Hi Guys

not near the van at the moment and just wondering what size the front hub nut is? or can they vary?

cant find any info online and want to do some work on the driveshaft later on.

thanks
Andy
teenmal
Supreme Being
Posts: 3656
Joined: Thu Mar 27, 2008 6:08 pm
Location: north lanarkshire

Re: Front Hub Nut Size

Post by teenmal » Tue May 11, 2021 12:12 pm

Try this
Inner thread [mm]:M22 X 1,5
Spanner Size:32
Diameter [mm]:45
Height [mm]:21.
AndyHeard
Junior Bongonaut
Posts: 23
Joined: Sun Aug 27, 2017 6:32 pm
Location: South Wales

Re: Front Hub Nut Size

Post by AndyHeard » Tue May 11, 2021 3:10 pm

teenmal wrote: Tue May 11, 2021 12:12 pm Try this
Inner thread [mm]:M22 X 1,5
Spanner Size:32
Diameter [mm]:45
Height [mm]:21.

just gotten home and had a look. a 32 doesnt fit. looks more like a 34/36mm
teenmal
Supreme Being
Posts: 3656
Joined: Thu Mar 27, 2008 6:08 pm
Location: north lanarkshire

Re: Front Hub Nut Size

Post by teenmal » Tue May 11, 2021 3:38 pm

AndyHeard wrote: Tue May 11, 2021 3:10 pm
teenmal wrote: Tue May 11, 2021 12:12 pm Try this
Inner thread [mm]:M22 X 1,5
Spanner Size:32
Diameter [mm]:45
Height [mm]:21.

just gotten home and had a look. a 32 doesnt fit. looks more like a 34/36mm

Thats very possible , considering the age of these old vehicles I would not be surprised if it has been changed at some point, you are always best measuring what is on the vehicle.

PS your vehicle is 4wd ??
AndyHeard
Junior Bongonaut
Posts: 23
Joined: Sun Aug 27, 2017 6:32 pm
Location: South Wales

Re: Front Hub Nut Size

Post by AndyHeard » Tue May 11, 2021 7:43 pm

teenmal wrote: Tue May 11, 2021 3:38 pm
AndyHeard wrote: Tue May 11, 2021 3:10 pm
teenmal wrote: Tue May 11, 2021 12:12 pm Try this
Inner thread [mm]:M22 X 1,5
Spanner Size:32
Diameter [mm]:45
Height [mm]:21.

just gotten home and had a look. a 32 doesnt fit. looks more like a 34/36mm

Thats very possible , considering the age of these old vehicles I would not be surprised if it has been changed at some point, you are always best measuring what is on the vehicle.

PS your vehicle is 4wd ??
yes its the 4wd.

no worries. i cant find my Hub socket kit so i was hoping it wouldnt be more than 32mm. an excuse to buy more bits i guess :D
Post Reply

Return to “Techie Stuff”