V6 Cam belt and oil seals change
Moderators: Doone, westonwarrior
-
- Bongolier
- Posts: 183
- Joined: Fri Sep 04, 2015 7:32 pm
V6 Cam belt and oil seals change
I suspect the crank oil seal needs replacing. I have used a "seal conditioner/additive" to get through the lockdown period. As things are starting to get moving again, I need to get it sorted. I know it isn't a cheap if a full job is done with water pump and tensioner etc. Can anyone give me a ballpark figure of cost and how long it may take.
- g8dhe
- Supreme Being
- Posts: 10180
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: V6 Cam belt and oil seals change
In the order of £700 in 2013 and last time in 2018 it was £800, both times a few other bits as well plus this is down on the South Coast so hourly rates may vary!
-
- Bongolier
- Posts: 183
- Joined: Fri Sep 04, 2015 7:32 pm
Re: V6 Cam belt and oil seals change
Geoff, thanks for that, at least I have an idea now. Would that be over a couple of days?
- g8dhe
- Supreme Being
- Posts: 10180
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: V6 Cam belt and oil seals change
Yes I think its about a days work in all as it takes a little while to get the front of the engine fully accessible, I normally drop it in and they drop it back to me when done, there on old school garage, look after a lot of the local taxi fleet and driver training guys so they do sometimes have rush job on I just let them know if I'll be away at the end of the week or not!
Re: V6 Cam belt and oil seals change
Lot to be said for an Old School garage.
-
- Bongolier
- Posts: 183
- Joined: Fri Sep 04, 2015 7:32 pm
Re: V6 Cam belt and oil seals change
Geoff thanks for the reply. Hopefully I can arrange with the garage to collect and drop off, they do a lot of work with Bongo's but unfortunately about 15 miles away. Normally I drop it off and wait/shop.