Hey everyone,
I’m reassembling the new head and putting everything back together after replacing head gasket and new head. Just wondering if anyone knows about installing the exhaust manifold and intake manifold studs, ie. do we need to use any compound on the stud end that goes into the head? Do the studs need to be torqued down or just finger tight?
Thanks!
Installing studs into new head
Moderators: Doone, westonwarrior
Re: Installing studs into new head
They will definitely need to be torqued down, never heard of using a compound on studs, but someone with more knowledge may think differently.
- Northern Bongolow
- Supreme Being
- Posts: 7713
- Joined: Mon Mar 15, 2010 11:33 pm
- Location: AKA Vanessa
Re: Installing studs into new head
Go on YouTube, there's a good vid .
Type how to fit exhaust studs.
I always use copper slip or high temp antisieze especially on steel studs in an ally head.
Type how to fit exhaust studs.
I always use copper slip or high temp antisieze especially on steel studs in an ally head.