Hi All
I am thinking if fitting a oil pressure gauge to my van and have been trying to search but haven't found much (probably me though )
Its on a 95 diesel and i am just wondering if any one else has done this. I always like the idea of knowing the oil pressure and have done it on a number of cars in the past.
Would any one know what the thread is in the block and warning light switch.
Thanks
Ian
Oil Pressure Gauge
Moderators: Doone, westonwarrior
- Northern Bongolow
- Supreme Being
- Posts: 7713
- Joined: Mon Mar 15, 2010 11:33 pm
- Location: AKA Vanessa
Re: Oil Pressure Guage
If all else fails just whip out the switch and call into your local friendly car shop.
Obviously not driving Bongy.
Obviously not driving Bongy.
Re: Oil Pressure Guage
Cheers guys.
I will do some digging.
Its just so I can get the correct T adaptor so that I still have the warning light.
Wen I find out I will update the post
Ian
I will do some digging.
Its just so I can get the correct T adaptor so that I still have the warning light.
Wen I find out I will update the post
Ian
Re: Oil Pressure Guage
Perfect thank you.
Think I have found a T adaptor too.
Also did a bit of of digging to find out what the normal oil pressure should be and at 3000rpm should be between 60-70psi
Hope that's of some use to others.
Cheers
Ian
Think I have found a T adaptor too.
Also did a bit of of digging to find out what the normal oil pressure should be and at 3000rpm should be between 60-70psi
Hope that's of some use to others.
Cheers
Ian
Re: Oil Pressure Guage
This might be useful, you could also do a wee bit digging for an oil filter sandwich .
Take Care.
https://www.ebay.co.uk/itm/MAZDA-MX5-EU ... 2655203174
Take Care.
https://www.ebay.co.uk/itm/MAZDA-MX5-EU ... 2655203174