Rear light wiring loom.
Moderators: Doone, westonwarrior
-
- Bongonaut
- Posts: 45
- Joined: Mon Aug 09, 2010 10:05 am
- Location: Suffolk
Rear light wiring loom.
Does anyone know what route the wiring room to the small rectangular rear light (the one on the right hand side by the rear door) takes and ideally an easy way to access it? I'd like to link it to another couple of lights that I've installed so that they can all be switched on together.
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Rear light wiring loom.
You can unscrew the unit from the roof which gives access to the wiring. I've run a set of 4 12v LED downlighters which I soldered in to the existing cables.
-
- Bongonaut
- Posts: 45
- Joined: Mon Aug 09, 2010 10:05 am
- Location: Suffolk
Re: Rear light wiring loom.
Cheers Simon. did you get them all to come on with a single switch? I was hoping to tap into the wiring loom somewhere relatively accessible, to make the light come on with the with the others but retain the ability to switch it off independently.
- g8dhe
- Supreme Being
- Posts: 10217
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: Rear light wiring loom.
-
- Bongonaut
- Posts: 45
- Joined: Mon Aug 09, 2010 10:05 am
- Location: Suffolk
Re: Rear light wiring loom.
Fantastic, just what I was looking for. Many thanks!
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Rear light wiring loom.
If you take the feed from the connections at the back of the bulb, it will come on an off with the doors, or can be switched off all together.