Metallic rattle ?

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Metallic rattle ?

Post by M 80NGO » Fri Aug 17, 2012 6:34 pm

Over the last couple of days l'oreal has developed a metalic rattle at tickover as soon as seh gets above 1000 rpm the noise stops and she's fine, there is plenty of oil in her and she's not using any fluids, she drives fine and isn't chugging or smoking at all, i have had her up on the ramps and dropped the belly pan to check that every thing is as it should be and found that my crankshaft pulley retaining bolt was only finger tight #-o put a pulley lock on the pulley and tightened up the 38mm nut and hey presto no more rattle =D>

Could have been nast tho if the bolt had of come out whilst i was on the move tho [-o<
User avatar
lazyb5
Tribal Elder
Posts: 505
Joined: Fri Sep 17, 2010 9:15 pm
Location: Peterborough

Re: Metallic rattle ?

Post by lazyb5 » Fri Aug 17, 2012 6:40 pm

Hmm well there's tomorrows job ...well one of them :shock:
Image
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: Metallic rattle ?

Post by M 80NGO » Sun Aug 19, 2012 5:42 pm

lazyb5 wrote:Hmm well there's tomorrows job ...well one of them :shock:

Did you check it ?
User avatar
lazyb5
Tribal Elder
Posts: 505
Joined: Fri Sep 17, 2010 9:15 pm
Location: Peterborough

Re: Metallic rattle ?

Post by lazyb5 » Sun Aug 19, 2012 6:15 pm

No I didn't I forgot and took us all for a bike ride :shock: looks like tomorrow night can I get at it from passenger side or am I lying on the floor again :lol:
Image
jaylee
Supreme Being
Posts: 5500
Joined: Wed Mar 05, 2008 4:56 pm
Location: AQVAE SVLIS

Re: Metallic rattle ?

Post by jaylee » Sun Aug 19, 2012 8:33 pm

Can only the front part of the belly pan be removed or are they both locked together so both parts have to come off together...? :roll: http://lushprojects.com/bongopartsmk2/c ... mgno=.html
Cheaper by comparison to a race horse...
Image
steveyd
Bongolier
Posts: 168
Joined: Tue Mar 16, 2010 9:10 pm
Location: Wantage

Re: Metallic rattle ?

Post by steveyd » Mon Aug 20, 2012 11:54 am

Hi,

Mine's been doing this for a while.. thought it was something to do with a hole in my exhaust - fixed the exhaust and the noise is still there. She's not been used very much, perhaps just as well. Will check tonight! Yikes!

Cheers,

Steveyd
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: Metallic rattle ?

Post by M 80NGO » Mon Aug 20, 2012 6:17 pm

lazyb5 wrote:No I didn't I forgot and took us all for a bike ride :shock: looks like tomorrow night can I get at it from passenger side or am I lying on the floor again :lol:

On the floor i'm afraid with Belly pan off :roll: once the pans off tho there is ooooooodles of room to get at it :wink: where did you bike ride ? 8)
User avatar
lazyb5
Tribal Elder
Posts: 505
Joined: Fri Sep 17, 2010 9:15 pm
Location: Peterborough

Re: Metallic rattle ?

Post by lazyb5 » Mon Aug 20, 2012 10:05 pm

We had a charity bike ride round Rutland water all 23 miles of it in 30 degree heat and a puncture as well :(
Image
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: Metallic rattle ?

Post by M 80NGO » Tue Aug 21, 2012 10:22 pm

lazyb5 wrote:We had a charity bike ride round Rutland water all 23 miles of it in 30 degree heat and a puncture as well :(

Nice one i like to cycle rutland its a proper good ride, i went out for a 20 mile bike ride t'other night and got a puncture front and rear 5 miles from home with no mobile phone to call the wife to come and rescue me with l'oreal #-o so it was a nice walk home for me in the warm evening sun 8)
User avatar
lazyb5
Tribal Elder
Posts: 505
Joined: Fri Sep 17, 2010 9:15 pm
Location: Peterborough

Re: Metallic rattle ?

Post by lazyb5 » Wed Aug 22, 2012 7:59 pm

At least I had a spare tube with me, the tyres are horrid so just ordered some schwalbe land cruisers see what they are like :D
Image
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: Metallic rattle ?

Post by M 80NGO » Wed Aug 22, 2012 9:45 pm

lazyb5 wrote:At least I had a spare tube with me, the tyres are horrid so just ordered some schwalbe land cruisers see what they are like :D

Your getting way to technical for me :shock: next you'll be taking it up the phantoms track and gettin air wiv da yoof 8)
steveyd
Bongolier
Posts: 168
Joined: Tue Mar 16, 2010 9:10 pm
Location: Wantage

Re: Metallic rattle ?

Post by steveyd » Thu Aug 23, 2012 10:58 am

Hi,

A bit off topic :wink: but got shwalbe land cruisers on my mtb - 2k miles so far and only got 2 punctures when real off roading it when I went over a huge bramble! Not too bad for off road either and have been well impressed!

S
User avatar
lazyb5
Tribal Elder
Posts: 505
Joined: Fri Sep 17, 2010 9:15 pm
Location: Peterborough

Re: Metallic rattle ?

Post by lazyb5 » Thu Aug 23, 2012 6:59 pm

M 80NGO wrote:
lazyb5 wrote:At least I had a spare tube with me, the tyres are horrid so just ordered some schwalbe land cruisers see what they are like :D

Your getting way to technical for me :shock: next you'll be taking it up the phantoms track and gettin air wiv da yoof 8)
Lol don't think so far to old for that :lol:
Image
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: Metallic rattle ?

Post by M 80NGO » Thu Aug 23, 2012 9:59 pm

lazyb5 wrote:Lol don't think so far to old for that :lol:
It's just a number Lazyb :wink:
Locked

Return to “Techie Stuff”