Bongo Fury

I have an engine crane, based in Essex.

I have 2 pairs Ramps, 2 x 2 ton trolley jacks, various Sockets inc weird size metrics, worklamps and a drive that can be jigged about to make room if need be...........Cambridgeshire......Happy to loan - but as they say......you break it - you replace it......

Pela 6000 added to my toolkit....

I have amonst other things useful for the Bongo,
3/4 drive socket for the engine pulley bolt (including 3/4 drive tommy bar)
Pela pump for fluid changes
And best of all, Sealey vacuum pump and compressor for easily changing the engine coolant without air locks.

Anyone in the South Yoks area is welcome to use.

Steve Mc

portable 240v generator now for the list as well as another set of ramps and another Jack for a full lift of a Bongo

as well as Tea/Coffee/Sympathy/Phone/internet and bed for the night if needed......

Haydn

Where abouts are you in Somerset? I am in Salisbury, and I think this whole idea is a great way to keep the Bongo community thriving. As a newbie to the clan, I dare say there is going to be more than one occasion where i will be needing the help of veteran owners, and probably at the end of the year I will need to do my first service, and a knowing eye would be helpful, (and one who has the kit to do it properly )

Do you know if the Southern softies are getting together soon?

I have a kettle

east lancashire/west yorkshire/south yorkshire dales, if your in need give us a shout,emergency overnight parking/repairs.and a few tools around, not for take away use but can use to get you mobile again.knowledge of hose changing/bleeding etc.

Got plenty of tools ,and odd stuff, pullers, a mig welder grinders benders , hydraulic engine crane ,ramps ,stands,etc...

Usual spanners and sockets including the Halfords Professional 150 pc set, 12V impact gun, breaker bar, speed bleeder (brakes) multimeter,torque wrench, taps and dies, hole saws, conecutter, gilbows, power tools including angle grinder and grinderettes, one freehand and one in a stand, clamps, props, carpentry tools, plumbing tools, pop rivet guns; plier and concertina type, mastic and flooring glue guns, 10 Amp battery charger. The only thing I don't have is a vice but it is on my list.

If all else fails there is a sledgehammer too.

Socket sets, Spanners, Multimeter, Axle Stands, Trolly Jack, Hole cutters, drill and drill bits, 9 inch Angle grinder, Jigsaw, Large Drive and garage (wont fit a Bongo in it though)

Based in Bolton

Tony

Velocette wrote:Usual spanners and sockets including the Halfords Professional 150 pc set, 12V impact gun, breaker bar, speed bleeder (brakes) multimeter,torque wrench, taps and dies, hole saws, conecutter, gilbows, power tools including angle grinder and grinderettes, one freehand and one in a stand, clamps, props, carpentry tools, plumbing tools, pop rivet guns; plier and concertina type, mastic and flooring glue guns, 10 Amp battery charger. The only thing I don't have is a vice but it is on my list.

If all else fails there is a sledgehammer too.

Got a vice now, just need a bench and somewhere to put it! The breakfast bar is not an option seemingly....

Where are all the bongo owners in the Leicestershire area, I`m new to bongo ownership & rituals but keen to learn, have spotted 3 bongo`s within 1mile radius of Wigston there must be more? knocking on Bongo owners doors & asking where to get them serviced
or DIYing is an interesting experience.

Regarding tools, have a Pela pump,various 1/2"sockets, sets of screw drivers/filter removal tools a little knowledge of radiator replacement & Bongo bleeding but wiiling to assist anyone with the little knowledge have gained. Looking to add low level ramps sometime soon.

Don`t service motorcycles.

I now have a solid tow bar rated at 2 1/2 tons.

We're near M5 Junctions 19/20 and A370 Bristol - Weston Road.

Happy to pull Bongos if needed and can help with spare room/tea/ shoulder to cry on.

My Mobile is in the Bongo Bunch section, or ask around the regulars here.

I have several hand tools spanners, sockets, multimeter etc.

Trolly jacks axel stands, ramps pela pump air compresser and some extra mussel if needed

Mainly free for help at weekends due to working away during the week.