We got visas. We have only 5 car. 3 Mazda Friendee (2 SGL5 + SGLR), Toyota HiAce Camper and Nissan Elgrand.

We find pumps number and all parts number inside pump. On russian forum: http://mikrob.ru/viewtopic.php?f=10&t=19186 Pump 95-99 (mechanical) pic: http://www.demonav.ru/For_work/104740-0824.jpg All numbers for pic: http://mikrob.ru/download/file.php?id=22615&sid=571e6575bf772c07c17ec64e5d2e74...

Here is our maintenance table and liquids list translated from russian for all Friendee engines: http://translate.google.ru/translate?u=http%3A%2F%2Fmazdafriendee.ru%2Findex.php%3Foption%3Dcom_content%26task%3Dview%26id%3D70%26Itemid%3D265&sl=ru&tl=en&hl=ru&ie=UTF-8 http://translate....

In Russia, a lot of very bad and dirty roads. The higher wheel, the better for the car. This owner has established itself so much wheel. But failing to wash it for the photo. We have a small car called Oka http://www.seaz.ru/products/models/ . Almost as a Mini , only more frightening. We use spring ...

We found the solution to this problem. Should inside the original set of rear springs springs from a small car (like Toyota Starlet, Honda Logo...). The problem goes. http://mikrob.ru/viewtopic.php?t=9971 or http://translate.google.com/translate?u=http%3A%2F%2Fmikrob.ru%2Fviewtopic.php%3Ft%3D9971&am...

I hope match more than registered on our site forum (around 250-300). Becouse many people in Russia do not use internet.
Our service book released 1500 copies. All copies sold through retail store and internet store and our club. We wait new print.

It is not easy for home work.
Some pic:
http://mikrob.ru/download/file.php?id=9204
http://mikrob.ru/download/file.php?id=9205
http://mikrob.ru/download/file.php?id=9206

Manufacturer recommends installing at the front and rear axle different sizes, it is true difference in the length of the circumference of no more than 1%. And for 2WD car, and 4WD. The theory and practice show that the installation of wheels the same size on both axles does not lead to deterioratio...

This is translate from japan catalog about Friendee: To increase the stability of the car traffic on expressways highways used diferent size wheels on the front and rear axles. The vehicle has a fairly large weight and wheel base of 2920 mm and a height at the expense of it is highly sensitive to th...

It is not only for EGR system. This is pipe with vacuum for 4 relay:
EGR, Cold start Idle up, aircon idle up, and another one

for V6 best view with mirror from under driver seat

Hi jgm I think you need verify your 4WD system. It's easy. You need to raise one (any) front wheel and with the help of dynamometer key turn it on 90 degrees with a force of 59 Nm or 6.0 kgf-m. If the turn of 90 degrees must be 30 seconds or more than viscus sleeve work. Another case change viscus s...

Check works or not simple. Put your hand to the exhaust pipe when the motor is working. Let assistant press the button. You feel as a force gases decrease. If this does not happen, then the system is not working.

Off. I'd never seen front LSD on Friendee. skater please give me your full body number (here or PM). I'll send it in special Mazda EPC Program and put here pic front LSD

pic with Torque setting. Nut #1

dandywarhol absolutely right