Search found 25 matches
- Tue May 21, 2013 10:34 pm
- Forum: Techie Stuff
- Topic: Central Locking Key Fob.
- Replies: 4
- Views: 2837
Re: Central Locking Key Fob.
PS my alarms some form of after market alarm installed by the previous owner. When I was researching apparently theres a number on a chip on the remote circuit board that tells you what frequency it runs at. I dont know much more than that but it might be worth trawling the internet. I didnt need to...
- Tue May 21, 2013 10:25 pm
- Forum: Techie Stuff
- Topic: Central Locking Key Fob.
- Replies: 4
- Views: 2837
Re: Central Locking Key Fob.
I just bought 2 and they worked fine. lost my main set of keys a couple of weeks ago and cant find them anywhere and the remote on my spare was tempremental to say the least. They cost me a fiver each with free delivery from china. I just looked in the handbook for my alarm and it stated they operat...
- Wed Mar 20, 2013 12:01 pm
- Forum: Techie Stuff
- Topic: CV joint removal from wheel hub
- Replies: 9
- Views: 2891
Re: CV joint removal from wheel hub
You'll definitely need a hub puller. I even needed it to get the Brake disk off as mine was stuck fast. Make sure you have a meaty breaker bar, my new one lasted about 10 minutes. I had to make one out of a hollow steel bar and an old knackered braker bar. Still going strong. Personally If you are g...
- Wed Nov 14, 2012 2:23 pm
- Forum: Techie Stuff
- Topic: CV joint removal from wheel hub
- Replies: 9
- Views: 2891
Re: CV joint removal from wheel hub
Woo hoo job done. 6 new high tensile bolts for the hub puller tightened to the max while installed to the hub. A bucket load of WD40, 1 modified braker bar, 1 lump hammer for stress relief, 1 crowbar to hold the hub and 1 hernia using sheer force to crack that beauty. Now seven days behind my origin...
- Sun Nov 11, 2012 9:37 pm
- Forum: Eastern Counties
- Topic: Roll Call
- Replies: 17
- Views: 20049
Re: Roll Call
I'm here.
Had mine about 6 weeks. Loving it, kids are loving it more, my 2 year old has to say good night to it most nights before she'll go to bed.
Unfortunately its currently on axle stands on my drive attempting a CV joint replacement. Not as easy a job as i expected.
Had mine about 6 weeks. Loving it, kids are loving it more, my 2 year old has to say good night to it most nights before she'll go to bed.
Unfortunately its currently on axle stands on my drive attempting a CV joint replacement. Not as easy a job as i expected.
- Sun Nov 11, 2012 9:31 pm
- Forum: Techie Stuff
- Topic: CV joint removal from wheel hub
- Replies: 9
- Views: 2891
Re: CV joint removal from wheel hub
Done some serious clouting already to no avail. On the bongo and my fingers. Decided to have a rest day today, unfortunately the pixies must have been on holiday as they didnt shift it in the night. Will have a go at removing the drive shaft this week and do the old soaking in diesel jobby. Failing ...
- Sat Nov 10, 2012 5:46 pm
- Forum: Techie Stuff
- Topic: CV joint removal from wheel hub
- Replies: 9
- Views: 2891
Re: CV joint removal from wheel hub
Thanks
Its currently drowning in WD40 with the hub extractor done as tight as I can safely do with 2 wedges hammered in the back betweed the hub and CV joint.
I'm going to leave it to marinade overnight. Lets hope the pixies visit in the night
Its currently drowning in WD40 with the hub extractor done as tight as I can safely do with 2 wedges hammered in the back betweed the hub and CV joint.
I'm going to leave it to marinade overnight. Lets hope the pixies visit in the night
- Sat Nov 10, 2012 5:34 pm
- Forum: Techie Stuff
- Topic: CV joint removal from wheel hub
- Replies: 9
- Views: 2891
Re: CV joint removal from wheel hub
going to hopefully borrow a mig welder tomorrow and heat the hub up as this thing it still not shifting.
thanks for looking anyway
thanks for looking anyway
- Sat Nov 10, 2012 3:28 pm
- Forum: Techie Stuff
- Topic: CV joint removal from wheel hub
- Replies: 9
- Views: 2891
CV joint removal from wheel hub
Hi been lurking in the shadows for a while and clueing myself up. I am attempting (i say attempting as its not going as smoothly as I would have liked) an outer CV joint replacement On my bongo. Ive removed the wheel hub nut disconnected the wishbone from the wheel hub disconnected the steering rod ...
- Wed Oct 10, 2012 1:05 pm
- Forum: Campervan Conversions in Bongos
- Topic: Awning brackets, drilling the roof
- Replies: 12
- Views: 5112
Re: Awning brackets, drilling the roof
Hi gilly99
Have you still got a copy of the drawings for your bracket? I've just aquired a omnister 5002 and want to fix it to my bongo. Yours looks like the sort of fixing i'd like to try on mine.
Cheers in advance
Have you still got a copy of the drawings for your bracket? I've just aquired a omnister 5002 and want to fix it to my bongo. Yours looks like the sort of fixing i'd like to try on mine.
Cheers in advance